Page History

...

If OpenVPN doesn't reconnect after wake

On one of my laptops (running Manjaro) the openvpn client wouldn't reconnect after waking from sleep.  As outlined in the Arch wiki, you can quickly add a systemd service which sends a SIGHUP signal to OpenVPN which forces a reconnect to occur:

[Unit]
Description=Restart OpenVPN after suspend

[Service]
ExecStart=/usr/bin/pkill --signal SIGHUP --exact openvpn

[Install]
WantedBy=sleep.target

then enable the service:

sudo systemctl enable openvpn-reconnect

Recovering after an accidental ./clean-all

Using port 443 for OpenVPN & other applications

...

(like a webserver)

If the network environment you're operating in is restrictive then chances are port 1194 (standard openvpn port) will be blocked - which means that you wont' be able to connect to your openvpn server from that environment without making some changes on your end.  One way to get around this is to change your openvpn port to something that will most likely NOT be blocked, like port 443 (https/ssl port).  Doing so is trivial within your openvpn server.conf file.  However, issues arise if you also use said server for other things, like a webserver - especially is you run multiple applications from said server (see Apache reverse-proxy SSL to multiple server applications for a standard setup running multiple web applications with Apache).

In this use case, we are actually going to use port 443 for both OpenVPN and our Apache2 reverse proxy.  Now, we can't bind port 443 simultaneously to OpenVPN and Apache2 but we can use share port 443 by fronting these with a SSL/OpenVPN multiplexer like SSLH.

How this works is we'll change our Apache reverse-proxy listening port to something else (like 8443), then bind port 443 to SSLH.  SSLH will analyse traffic incoming to port 443, and if it's standard https then it transparently forwards this traffic to port 8443, and if it's OpenVPN traffic then it forwards it to our standard server-side OpenVPN port 1194.

This approach assumes you've setup an Apache reverse-proxy in which you take care of SSL termination with the relevant SSL certs within said reverse-proxy which listens (binded) to port 443.  It also assumes that you've setup OpenVPN as outlined previously in this article and are using port 1194 for OpenVPN.

Change OpenVPN to tcp-server mode

First let's make a small change to our OpenVPN by replacing

proto udp 

with: 

proto tcp-server

in /etc/openvpn/server.conf 

Change Apache SSL listening port and update any vhosts directives

Next, we're going to change our Apache SSL listening port to 8443 (you should check that this port is free - if not choose another valid arbitrary port number).

For this we'll need to change several files, the first should be changed to look like:

Listen 80

<IfModule ssl_module>
        Listen 4443
</IfModule>

<IfModule mod_gnutls.c>
        Listen 4443
</IfModule>

We'll also need to change any and all site configuration vhost directives from:

<VirtualHost *:443>
    ...
</VirtualHost>

to:

<VirtualHost *:4443>
    ...
</VirtualHost>

We won't restart Apache2 just yet...

Install and configure sslh

Next we're let's install SSLH:

sudo apt install sslh

and select standalone mode when asked to select a mode.

Configuration of SSLH is done in a single file.  Your sslh configuration file should look like:

# Default options for sslh initscript
# sourced by /etc/init.d/sslh

# Disabled by default, to force yourself
# to read the configuration:
# - /usr/share/doc/sslh/README.Debian (quick start)
# - /usr/share/doc/sslh/README, at "Configuration" section
# - sslh(8) via "man sslh" for more configuration details.
# Once configuration ready, you *must* set RUN to yes here
# and try to start sslh (standalone mode only)

RUN=yes

# binary to use: forked (sslh) or single-thread (sslh-select) version
# systemd users: don't forget to modify /lib/systemd/system/sslh.service
DAEMON=/usr/sbin/sslh

DAEMON_OPTS="--user sslh --transparent --listen <INTERNAL-IP-ADDRESS>:443 --ssl <INTERNAL-IP-ADDRESS>:4443 --openvpn <INTERNAL-IP-ADDRESS>:1194 --pidfile /var/run/sslh/sslh.pid"

where <INTERNAL-IP-ADDRESS> should be replaced with your server's internal IP address (e.g. 10.0.0.x or 192.168.1.x).

For transparent mode to work we also need to modify iptables.  To ease configuration I created a one-off script.  Note that these settings won't survive a reboot so once we're happy we're going to make these settings persistent.

Copy the following to a file, make it executable and execute with sudo.

#!/bin/bash

iptables -t mangle -N SSLH
iptables -t mangle -A OUTPUT --protocol tcp --out-interface enp0s25 --sport 4443 --jump SSLH
iptables -t mangle -A OUTPUT --protocol tcp --out-interface enp0s25 --sport 1194 --jump SSLH
iptables -t mangle -A SSLH --jump MARK --set-mark 0x1
iptables -t mangle -A SSLH --jump ACCEPT
ip rule add fwmark 0x1 lookup 100
ip route add local 0.0.0.0/0 dev lo table 100

ip6tables -t mangle -N SSLH
ip6tables -t mangle -A OUTPUT --protocol tcp --out-interface enp0s25 --sport 4443 --jump SSLH
ip6tables -t mangle -A OUTPUT --protocol tcp --out-interface enp0s25 --sport 1194 --jump SSLH
ip6tables -t mangle -A SSLH --jump MARK --set-mark 0x1
ip6tables -t mangle -A SSLH --jump ACCEPT
ip -6 rule add fwmark 0x1 lookup 100
ip -6 route add local ::/0 dev lo table 100

Restart Apache, start sslh, and test...

Right, it's time to test the setup.  To do so we need to restart Apache, start SSLH:

sudo systemctl restart apache2
sudo systemctl start sslh

If all went well you should be able to still access your webserver AND connect to OpenVPN on port 443.

Finalise configuration

We'll finalise the configuration (once you've tested it) by enabling sslh (so it starts on boot) and by making the iptable rules (above) persistent.

To make SSLH start on boot:

sudo systemctl enable sslh

See the this article to make the current iptable rules (after you've executed the iptable script above) persistent. StatuscolourGreentitleCOMING SOON

References

1. https://www.digitalocean.com/community/tutorials/how-to-set-up-an-openvpn-server-on-ubuntu-16-04
2. https://jarrousse.org/getting-openvpn-and-nginx-to-share-port-443/stackoverflow.com/questions/34304022/change-ssl-port-of-apache2-server-err-ssl-protocol-error
3. http://www.rutschle.net/tech/sslh/README.html

Related articles

...